Locations

Round and Square Stainless Steel Tubing

Tubing is a pipe or hollow cylinder for the conveyance of fluids (liquids or gases). The terms 'pipe' and 'tubing' are almost interchangeable, although minor distinctions exist (generally, "tubing" implies tighter engineering requirements than "pipe").

Tubing and pipe may be specified by standard pipe size designations, e.g. Nominal Pipe Size — or by nominal outside or inside diameter and/or wall thickness. The actual dimensions of pipe are usually not the nominal dimensions (i.e., a "1-inch" pipe will not actually measure 1" in either outside or inside diameter) — whereas many types of tubing are specified by actual I.D., O.D., and/or wall thickness.

There are many industry and government standards for pipe and tubing. Wall thickness ranges from 22 gage ( .028 ) wall to ½” wall ( .500 ) wall. Outside diameters range from 1/8”- to 16”. Inquire about sizes large than 16” in diameter, and wall thickness above ½”.

Square Tubing
304/304L 18gage	304/304L 16 gage	304/304L 14 gage	304/304L 12 gage
1/2" x 1/2" x .049 wall	1/2" x 1/2" x .065 wall	3/4" x 3/4" x .083 wall	1" x 1" x .109 wall
3/4" x 3/4" x .049 wall	5/8" x 5/8" x .065 wall	1" x 1" x .083 wall	1.25" x 1.25" x .109 wall
1" x 1" x .049 wall	3/4" x 3/4" x .065 wall	1.25" x 1.25" x .083 wall	1.5" x 1.5" x .109 wall
1.25" x 1.25" x .049 wall	1" x 1" x .065 wall	1.5" x 1.5" x .083 wall	2" x 2" x .109 wall
1.5" x 1.5" x .049 wall	1.25" x 1.25" x .065 wall	2" x 2" x .083 wall
	1.5" x 1.5" x .065 wall
	2" x 2" x .065 wall
304/304L 11 gage	304/304L 7 gage	304/304L 1/4" wall	304/304L 3/8" wall
3/4" x 3/4" x .120 wall	1.5" x 1.5" x .180 wall	1.5" x 1.5" x .250 wall	4" x 4" x .375 wall
1" x 1" x .120 wall	2" x 2" x .180 wall	2" x 2 " x .250 wall	6" x 6" x .375 wall
1.25" x 1.25" x .120 wall	2.5" x 2.5" x .180 wall	2.5" x 2.5" x .250 wall	8" x 8" x .375 wall
1.5" x 1.5" x .120 wall	3" x 3" x .180 wall	3" x 3" x .250 wall	10" x 10" x .375 wall
2" x 2" x .120 wall	4" x 4" x .180 wall	4" x 4" x .250 wall
2.5" x 2.5" x .120 wall	5" x 5" x .180 wall	5" x 5" x .250 wall
3" x 3" x .120 wall	6" x 6" x .180 wall	6" x 6" x .250 wall
4" x 4" x .120 wall	8" x 8" x .180 wall	8" x 8" x .250 wall
		10" x 10" x .250 wall
		12" x 12" x .250 wall

Rectangle Tubing
304/304L 16 gage	304/304L 14 gage	304/304L 11 gage
1/2" x 1" x .065 wall	1" x 2" x .083 wall	1" x 1.5" x .120 wall
1/2" x 1.5" x .065 wall		1" x 2" x .120 wall
3/4" x 2" x .065 wall		1" x 3" x wall
1" x 1.5" x .065 wall		1.5" x 3" x .120 wall
1" x 2" x .065 wall		2" x 3" x .120 wall
1" x 3" x .065 wall		2" x 4" x .120 wall
1.5" x 2" x .065 wall		2" x 6" x .120 wall
1.5" x 3" x .065 wall		3" x 4" x .120 wall
304/304L 7 gage	304/304L 1/4" wall
2" x 3" x .180 wall	2" x 3" x .250 wall
2" x 4" x .180 wall	2" x 4" x .250 wall
2" x 6" x .180 wall	2" x 6" x .250 wall
3" x 4" x .180 wall	3" x 4" x .250 wall
3" x 5" x .180 wall	3" x 5" x .250 wall
3" x 6" x .180 wall	3" x 6" x .250 wall
4" x 6" x .180 wall	4" x 6" x .250 wall
	4" x 8" x .250 wall
	4" x 10" x .250 wall
	4" x 12" x .250 wall
	6" x 8" x .250 wall
	6" x 10" x .250 wall

Round Stainless Steel Tubing
22 gage / .028 wall 304/304L	20 gage / .035 wall 304/304L	18 gage / .049 wall 304/304L
22 gage .028 wall x 1/8" o.d.	20 gage .035 wall x 3/16" o.d.	18 gage .049 Wall 1/4" o.d.
22 gage .028 wall x 3/16" o.d.	20 gage .035 wall x 1/4" o.d.	18 gage .049 wall x 5/16" o.d.
22 gage .028 wall x 1/4" o.d.	20 gage .035 wall x 5/16" o.d.	18 gage .049 wall 3/8" o.d.
22 gage .028 wall x 5/16" o.d.	20 gage .035 wall x 3/8" o.d.	18 gage .049 wall 7/16" o.d.
22 gage .028 wall x 3/8" o.d.	20 gage .035 wall x 7/16" o.d.	18 gage .049 wall 1/2" o.d.
22 gage .028 wall x 1/2" .o.d.	20 gage .035 wall x 1/2" o.d.	18 gage .049 wall x 5/8" o.d.
22 gage .028 wall x 5/8" o.d.	20 gage .035 wall x 5/8" o.d.	18 gage .049 wall x 3/4" o.d.
	20 gage .035 wall x 3/4" o.d.	18 gage .049 wall x 7/8" o.d.
	20 gage .035 wall x 7/8" o.d.	18 gage .049 wall x 1" o.d.
	20 gage .035 wall x 1" o.d.	18 gage .049 wall x 1-1/4" o.d.
	20 gage .035 wall x 1-1/4" o.d.	18 gage .049 wall x 1-1/2" o.d.
	20 gage .035 wall x 1-1/2" o.d.	18 gage .049 wall x 1-3/4" o.d.
	20 gage .035 wall x 1-3/4" o.d.	18 gage .049 wall x 2" o.d.
	20 gage .035 wall x 2" o.d.
16 gage / .065 wall 304/304L	14 gage .083 wall 304/304L	11 gage .120 wall 304/304L
16 gage .065 wall x 1/4" o.d.	14 gage .083 wall x 1" o.d.	11 gage .120 wall x 1/2" o.d. seamless
16 gage .065 wall x 5/16" o.d.	14 gage .083 wall x 1-1/4" o.d.	11 gage .120 wall x 5/8" o.d.
16 gage .065 wall x 3/8" o.d.	14 gage .083 wall x 1-1/2" o.d.	11 gage .120 wall x 3/4"
16 gage .065 wall x 7/16" o.d.	14 gage .083 wall x 2" o.d.	11 gage .120 wall x 7/8" o.d.
16 gage .065 wall x 1/2" o.d.		11 gage .120 wall x 1" o.d.
16 gage .065 wall x 5/8" o.d.		11 gage .120 wall x 1-1/4" o.d.
16 gage .065 wall x 3/4" o.d.		11 gage .120 wall x 1-1/2" o.d.
16 gage .065 wall x 7/8" o.d.		11 gaga .120 wall x 1-3/4" o.d.
16 gage .065 wall x 1" o.d.		11 gage .120 wall x 2" o.d.
16 gage .065 wall x 1-1/8" o.d.		11 gage .120 wall x 2-1/2' o.d.
16 gage .065 wall x 1-1/4" o.d.		11 gage .120 wall 3" o.d.
16 gage .065 wall x 1-3/8" o.d.		11 gage .120 wall x 3-1/4"
16 gage .065 wall x 1-1/2" o.d.		11 gage .120 wall x 3-1/2"
16 gage .065 wall x 1-5/8" o.d.		11 gage .120 wall x 3-3/4"
16 gage .065 wall x 1-3/4" o.d.		11 gage .120 wall x 4" o.d.
16 gage .065 wall x 2" o.d.
16 gage .065 wall x 2-1/4" o.d.
16 gage .065 wall x 2-1/2" o.d.
16 gage .065 wall x 3" o.d.
16 gage .065 wall x 3-1/2" o.d.
16 gage .065 wall x 4" o.d.